X396 低体积384孔/96孔低洗脱磁力板（含集成缓冲底座）

SKU: A040523 (Magnet Plate) - SKU: A040523KT (Magnet plate & top plate kit) Ideal magnet for all of your low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 4 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates.

Read About Cushion Base Here X396 LE Magnet Plate 96-/384-Well with Integrated Cushion Base Ideal magnet for all of your automated low volume needs. From Low elution 96-well PCR applications to 384-well, the X396 has you covered. No need to purchase two separate plates anymore. 96-well volumes as low as 5 µL are achieved from 96-well, PCR plates on the inside of the magnet, while the outside of each magnet will pull beads to well sides in 384-well plates. Highlights Low Elutions As low as 5 µL from both 96-well, and 384-well PCR plates Fast Separations Strong NdFeB Ring Magnets ensure fast, precise separations Integrated Cushion Cushion base compensates for labware and consumable inconsistencies Robot Friendly SBS/ ANSI footprint to fit into all liquid handling robots Shown here with a 384-well PCR plate. A 96-well plate sits on top of magnets Unique magnet design Unique magnet structure allows for either 96-, or 384-Well Low Elution applications Fast bead separations using strong NdFeB magnets Compatible with standard 384-, and 96- well PCR Plates Corner brackets to prevent microplates from slipping off magnets Side cuts allowing liquid handling robot gripper ANSI/ SBS compliant footprint to fit into all liquid handlers Integrated cushion base to help compensate for robot and labware inconsistences Made in the USA Compatibility This magnet was designed to be compatible with common microplates, all liquid handler robots, and any magnetic beads Full-, Semi, and Non-Skirted 96-Well PCR plates 384-Well PCR Plates Some standard v-, or pyramid-bottom 384-well plates 0.2 mL PCR Tubes and strips (with Kit shown to right) Shown in kit form for 0.2 mL PCR tubes on Liquid Handling deck Comparison Compare a 384-well plate to a 96-well PCR plate. You will see the 384-well sits down around the magnets, this will pull beads to the well sides like a post magnet. The 96-well plate sits on top of the magnets creating a ring of beads 384-Well PCR Plate96-Well PCR Plate FAQ What is the benefit of an aluminum product? Aluminum is much easier to make precision products out of then plastic. It stays flat and wont warp. This leads to more consistent results Where are the beads pelleted? For 96-Well PCR plates the pellets will form a ring about 2.5 mm in diameter up about 1mm from the well bottom For a 384-Well PCR plate the beabs will be pulled to the side of each well. What microplates can I use This plate accepts PCR plates (Full-, Semi-, and Non-Skirted) and most 384-well PCR microplates. For best results, we recommend full-skirt Compatible with some pyramid bottom 384-well. Will this fit my Liquid handling robot Yes, this plate has a standard SBS/ ANSI compliant footprint to fit into any platforms. The only restriction would be the height Is this product available for private labeling? Yes, all Permagen products are available to be private labeled with your company logo/ part numbers for resale How Can I purchase this Product Products can be purchased at our online shop, via. purchase order, over the phone, or by requesting a quote Are You Unsure of What Magnet Plate Best Suits your needs? Magnet Plate Comparison Here you will find an interactive chart of all Permagen magnet plates to compare Compare Plates Contact Us Navigate to our contact page to call or email for magnet plate recommendations Contact Page Join Our Newsletter We only send out new product announcements, sale notifications, and tradeshow dates.